You are not logged in.
Pages: 1
Is there any IS standard for rubber mats for electrical purpose?
Offline
Indian Standard specification for Insulating mats for electrical purposes IS 15652: 2006 –(superseding IS 5424:1969) has been published. The objective of this standard is to take care of the technological advances and developing consumer needs in the field of insulating mats for electrical purposes
Offline
If you need more details...Visit
https://law.resource.org/pub/in/bis/S05 … 2.2006.pdf
Offline
ISI Marked IS: 15652 2006 is highly demanding electrical rubber insulating mat in India. IS 15652 is divided in three category like as Class A, Class B & Class C. IS 15652 electrical insulating mat is available in roll and sheet form with 5mm/10mm/20mm length, 900mm/1m width and 2mm, 2.5mm and 3mm thickness with various color like as Red, Black, Blue and Grey.
The major specification of electrical insulating mat IS 15652 Class A is 2.0mm thickness; 3.3kv max uses voltage, 10kv AC proof voltage, 30kv dielectric strength, 10ma maximum leakages current and many more. IS 15652: 2006 Class B electrical rubber mat is 2.5mm thickness, 11kv max uses voltage, 22kv AC proof Voltage, 45KV ac Die electric voltage and 10m A Maximum leakages current. IS 15652 2006 electrical insulating mat Class C is 3.0mm thickness, 33kv max use voltage, 36KV ac proof voltage, 65kv ac die electric strength and 10m A max leakages current.
Electrical insulating rubber matting IES/BS EN 61111:2009 is used in indoor and outdoor locations and mostly used in front of rear side by side of electrical panel, switchgears, transformer and high voltage workplace to provide the high safety environment for workplaces. It is divided in different class like as Class 0, Class 1, Class 2, Class 3 and Class 4. The max use of voltage for Class 0 is 1000 volt, Class 1 is 7500 volt, class 2 is 17000 volt, class C is 26500 volt and Class 4 is 36000 volt. Standard thickness of Class 0, Class 1, Class 2, Class 3 and Class 4 is receptively 3mm, 3mm, 3/6mm, 4/6mm and 4/6mm. It is available in different color like as Red, white, yellow, green and Orange. IES 61111 width is 0.9mtr, 1.0mtr, 1.2mtr, its length is 2mtr, 5mtr, 10mtr, 20mtr or as per requirement. Thickness is per requirement of class. IES 61111 surface design is anti skid texture finish.
Offline
Pages: 1